Raw Sewage Cleanup
Raw sewage cleanup of Category 3 black water, with disinfection and drying.
See raw sewage cleanupGet Category 3 sewage removed after a backup in a basement, shower, floor drain or lower level in Inman Park. The work includes contaminated-material removal, cleaning, disinfection, structural drying and odor control.
Sewer backup cleanup safely clears wastewater and sewage solids left by an overflowing drain, toilet or sewer line. Cleaning and disinfection follow throughout the affected space, along with drying and odor control.
Sewer water can emerge at a shower, toilet, basement floor drain or utility sink, then spread into adjoining rooms, under appliances and behind baseboards. Category 3 black water includes sewage, which you should not touch directly. That remains true if the surface appears dry or the wastewater looks diluted.
Sewage cleanup goes beyond typical water damage work. Cleanup technicians in protective equipment contain the work area. They extract the wastewater and take out contaminated material that cannot be cleaned fully. Washable hard surfaces are cleaned before an EPA-registered disinfectant is applied for the contact time listed on its label. Each stage is recorded, including moisture checks and drying.

You hear which rooms and materials are affected, what can be cleaned, what may need removal and how drying will be checked, so you can move forward with a clear scope.
Work records, moisture details, photos and lists of affected materials may help when you speak with the property manager or insurance adjuster.
Sorting determines whether your items can receive cleaning, require a specialist or are unrecoverable, with valued belongings reviewed before anything is removed.
During sewage removal and movement of contaminated materials, protective equipment is used and the work space stays separated from unaffected rooms.
When wastewater comes out of the plumbing and reaches an occupied space or storage area, sewer cleanup is needed. Typical situations are:
Wastewater comes up through the floor drain, covering stored possessions, concrete, finished flooring or bottom wall areas.
A toilet or main line blockage forces sewage into a shower or tub, leaving contaminated water on tile, grout and nearby flooring.
The plumbing problem is corrected, but contaminated water, wet building materials and odor remain in the property.
After wastewater enters a storage area, office, restroom or retail space, restrict access and surrounding areas.
Start by keeping exposure low and limiting any further flow of wastewater into the space. The details vary by situation. When a broader emergency response is underway, respect entry restrictions issued by law enforcement, utilities or firefighters. Complete these actions ahead of sewer backup cleaning:
Call (888) 440-9227This service uses the closest published data for sewage biohazard cleanup. The cited guides place a typical project or most homeowner jobs between $2,000 and $10,000. Another published pricing guide gives a wider span of $1,500 to $8,000. The actual sewer backup cleanup cost depends on the affected area, the materials that absorbed sewage, drying needs and waste disposal.
These national ranges are taken from published cost guides, rather than a property visit. The price for your property is set after the on-site assessment, and you hear it before work starts.
Ask about cost: (888) 440-9227Coverage depends on the cause of the backup and the exact policy. Standard property coverage may exclude water that enters through a sewer or drain unless a sewer backup endorsement was added.
Ask the insurance company whether your policy includes sewer or drain backup coverage, what deductible applies and whether damaged contents and cleanup services are included.
A building owner may address the plumbing and structure, while a renter's policy may address personal property. The cause, insurance policies and lease determine responsibility and coverage.
Save an inventory, photos, cleanup documentation, moisture data and findings from the plumber. Stay out if taking photos would require unsafe entry.
Confirm whether approval must come first, which documentation the adjuster requests, whether mitigation and emergency response are covered, and how health-related removals should be recorded.
Sewer backup restoration services start after the active flow is stopped. Cleanup involves a controlled order so dirty water is not carried into clean parts of the property. The cleanup crew should explain the entire process before work begins.
The visible boundary is mapped by the cleanup crew, which also checks nearby rooms and takes moisture readings to detect water beneath or behind surfaces.
The affected area remains separate from clean spaces. In every situation, protective equipment must match exposure to wastewater, contaminated debris and splashes.
Pooled wastewater and solid matter are taken out using equipment meant for contaminated water. Tools and debris remain inside the isolated work space through every step, allowing the detailed cleaning process to start afterward.
Crews carefully contain and remove soaked drywall, wet insulation, carpet, pad and other porous material that cannot receive complete disinfection. Hazardous materials not related to the sewage need their own assessment and proper waste process.
The next stage in the remediation process washes soil from hard surfaces that remain. An EPA-registered disinfectant is then applied for the full label contact time.
Here, the cleanup involves dehumidification and moving air to dry the building. Equipment is placed according to moisture checks, which also reveal hidden materials needing added attention.
First, eliminate the odor source. Once source removal is complete, focused odor treatment and air filtration can address smells in nearby materials as well as the affected area.
A final check looks for odor, residual moisture and any visible dirt in the cleaned space. The entire process is recorded in photos and documents for insurance companies and property owners, showing each removal and anything left behind.
Call any hour. A specialist in sewer backup cleanup takes your call, explains each step and agrees on a start time with you.
Raw sewage can contain harmful microorganisms, bodily fluids and contaminated debris, so skin contact, splashes and tracked wastewater can create serious health risks.
The EPA says mold can begin growing on wet materials within 24 to 48 hours. Sewage removal and structural drying both matter after the plumbing problem is stopped.
Removed carpet, pad, drywall and porous contents must be contained so wastewater is not spread through the building or into surrounding areas during waste disposal.
Sewage may contain organisms linked to disease, so it is considered Category 3 black water. Wearing gloves does not prevent exposure from splashing, soaked clothes or contaminated shoes.
Can you clean it yourself? Only consider cleaning a very limited non-porous area when you have protective gear and can rule out electrical danger and exposure to anyone vulnerable. Choose professional sewage cleanup if sewage affected porous materials such as wood, carpet, drywall or insulation, entered a cavity, or spread beyond visible edges.
Porous items often have to come out after they absorb sewage. Hard and non-porous materials may remain, but only if each surface can be accessed, cleaned and disinfected. If other hazardous material is discovered in the affected space, it needs a separate assessment and cannot be combined with the sewage debris.

Sewer backup restoration takes as long as needed to remove sewage, address contaminated materials and bring the remaining structure to acceptable moisture conditions. Other restoration services or repairs come afterward, when the cleaned structure has dried. Room count alone matters less than backup size, the affected materials and water hidden from view.
| Scene | Typical time on site |
|---|---|
| Small hard-surface area | Extraction, cleaning and moisture checks may be completed before structural drying is needed |
| Finished room with porous materials | Moisture readings indicate when the structure is ready after removal, disinfection and drying have continued |
| Several rooms or hidden cavities | Work lasts longer if walls, floors, insulation or cabinetry require opening and drying |
Removing sewage is the first step in sewer odor removal. Bleach, added fragrance and surface sprays do not fix wastewater caught inside drywall, beneath a floor or within absorbent belongings. Odor that comes back after visible water has disappeared may point to moisture or contamination that remains hidden.
After contaminated materials are removed and hard surfaces are cleaned, HEPA air filtration can reduce airborne particles. Dehumidifiers and air movement support drying where appropriate. Odor treatment comes after source removal, and nearby rooms, cabinets and HVAC openings are checked for contamination or moisture left behind.
The full sewer backup cleanup guide covers what is cleaned or removed, odor and air quality work, and the rules that apply in your state.
Read the full sewer backup cleanup guide
Local population patterns, housing and site access may affect how containment and cleanup are planned.
For an injury during discovery, Emory University Hospital Midtown is the nearest listed hospital at approximately 1.2 miles away.
Reynoldstown, Old Fourth Ward, and Cabbagetown are nearby, which helps define practical routes for crews, equipment, and sealed waste containers.
A neighborhood address can differ from its broader city label, making the full street and unit information important for discreet cleanup access.
Ask on the call about cleanup options for neighboring communities and ZIP codes.
Raw sewage cleanup of Category 3 black water, with disinfection and drying.
See raw sewage cleanup
Crawl space sewage cleanup addresses wet insulation and affected soil.
See crawl space sewage cleanup
Any property receives disinfection after removal of infectious materials, including bodily fluids and blood.
See biohazard cleanup
Full decontamination of rooms, surfaces and air after infectious or hazardous exposure.
See biohazard decontamination
Biological remediation that removes contamination and returns a space to safe use.
See biohazard remediation
Rentals, residences and public bathrooms receive human feces cleanup and disinfection.
See human feces cleanup
Infectious disease disinfection with EPA-registered products and full surface coverage.
See infectious disease disinfection
Biohazard cleanup that starts as soon as a scene is released, day or night.
See emergency 24/7 biohazard cleanupCoverage may apply, although the policy language and cause determine the answer. Standard insurance may not cover sewer or drain water unless the policy includes a backup endorsement. Ask whether the insurer covers personal property, damaged building materials and cleanup, and find out which records and deductible apply before assuming coverage.
Carpet pad, swollen drywall, wet insulation, cardboard and other absorbent materials that took in sewage often cannot be fully disinfected. Hard, non-porous belongings may be cleanable. Before throwing away important belongings, record them and confirm what your insurer requires. Contain removed materials so wastewater is not tracked through clean areas.
A tiny, contained spill on sound concrete may be manageable with suitable protective gear and safe waste handling, but cracks and joints can hold contamination. Larger backups, electrical hazards, sewage that reached porous materials, or an area with unclear boundaries call for professional cleanup. Avoid unsafe standing water and never combine cleaning chemicals.
Raw sewage is treated as Category 3 black water because it may contain harmful microorganisms and contaminated debris. Do not touch the sewage or vacuum it with household equipment, and block access to the area. Cleaning should address the visible wastewater, absorbed contamination, moisture, waste disposal, odor and surrounding surfaces reached by foot traffic.
Have the obstruction corrected after stopping fixture use and closing the area to people and pets. The cleaning process involves sewage extraction, removal of porous material that absorbed it, hard-surface washing, full contact time for an EPA-registered disinfectant and structural drying. Hidden moisture under flooring and behind baseboards should also be checked.
Do not use the shower, toilet or nearby drains until a plumber checks the plumbing. Prevent wastewater from touching bare skin. The shower, drain surround, floor and nearby surfaces need soil removal, cleaning and disinfection. Also assess absorption in any cabinets, drywall, carpeting or wood exposed when water left the shower area.
You can request respectful, discreet sewer backup cleanup 24 hours a day, and crews use unmarked vehicles.